Schneider MPCYT50NNN00N Protective Film Touch Screen
- Model
- MPCYT50NNN00N
Item specifics
- Touch screen panel type
- Resistance touch screen
- Brand
- Schneider
- Warranty
- 365 Days
- Supply
- MPCYT50NNN00N Touch Panel Front Overlay
- Size
- 15 inch
Review
Description
Schneider Magelis MPCYT50NNN00N Touch Digitizer Glass Protective Film Replacement
Schneider Magelis Flex PC BOX iPC MPCYT50NNN00N Front Overlay Touch Panel Glass Terminal is the ideal operator terminal for Windows client applications. It is open to the web and functions as an extension of dedicated terminals and the industrial PC. MPCYT50NNN00N Touch screen panel Protective Film Flex PC BOX Terminal meets the demands of pre-defined operator dialog, display and remote diagnostics utilizing:
• Standard Windows XPe technologies
• Touch-sensitive screen and viewing angle of up to 160°
• Compact, rugged construction that is hardened and UL 508, CSA certified
• Fast Ethernet 10/100Mbps port, compact flash cards, two PCMCIA expansion slots that make it easier to utilize and upgrade
VICPAS supply MPCYT50NNN00N Magelis Schneider Terminal Front Overlay Touch screen glass with 365 Days warranty and support Urgent Worldwide Shipping. Extra care should be taken with respect to the specification concerning vibration levels when installing or moving the MPCYT50NNN00N Touchscreen digiziter glass front overlay terminal. If the MPCYT50NNN00N Protective Film HMI Panel Glass Flex PC BOX terminal is moved, for example, while it is installed in a rack equipped with caster wheels, the unit can receive excessive shock and vibration.
Specifications:
The table below describes the parameters of the MPCYT50NNN00N Magelis Schneider Front Overlay Touch Screen Panel.
| Part Number: | MPCYT50NNN00N |
| Display Type: | LCD TFT |
| Screen Diagonal: | 15 in |
| Warranty: | 365 Days |
| Product Line: | Magelis Flex PC BOX |
| Terminal Type: | Touchscreen Display |
| Operating Temp.: | 0...50 °C |
| Storage Temp.: | -20...60 °C |
| Display Resolution: | 1024 x 768 pixels XGA |
| Operating System: | Windows XPe SP2 |
Schneider Magelis HMI Manuals PDF Download:
FAQ:
Question: How to install the Schneider Magelis Flex PC BOX MPCYT50NNN00N Unit?
Answer:
1. Place the unit face down on a dry, soft surface and attach the gasket to the rear side, in the installation groove (see picture below):
2. Check that the gasket is correctly attached to the unit. The upper surface of the gasket should protrude evenly approximately 2 mm (0.08 in.) out of the groove.
Note: When installing the Flex PC BOX unit's installation gasket, avoid contact with the sharp edges of the Flex PC BOX frame, and press the gasket completely into its groove.
3. Insert each installation fastener securely into the slot’s recess at the top and bottom of the unit:
4. Attach and Secure the Rear Installation Attachments:
5. Insert each of the fasteners. Pull the fastener back until it is flush with the rear of the attachment hole.
Note: The corresponding installation attachments can be purchased as spare parts with the maintenance kit ref.: MPC YK 50 MNT KIT.
6. Use a screw driver to tighten to 0.5 N•m (4.5 lb-in) each of the fastener screws and secure the Flex PC BOX in place:
7. Flex PC BOX Viewing Angle.
Ensure that the panel’s viewing angle is tilted no more than 30 degrees from parallel to the operator (i.e. operator is directly in front).
Question: When an alarm appears on Magelis Schneider MPCYT50NNN00N Protective Film Touch Panel Glass Terminal, what does it means?
Answer:
• The alarm relay is closed (if this function is selected).
• The alarm strip is updated.
Common misspellings:
MPYT50NNN00NMPCYT50NN00N
MPCYT5oNNN00N
MPCTY50NNN00N
MPCYT500NNN00N
