6FC5203-0AF06-1AA0 Siemens OP012T Terminal Keyboard Touchscreen
6FC5203-0AF06-1AA0 Siemens OP012T Terminal Keyboard Touchscreen
6FC5203-0AF06-1AA0 Siemens OP012T Terminal Keyboard Touchscreen
6FC5203-0AF06-1AA0 Siemens OP012T Terminal Keyboard Touchscreen
6FC5203-0AF06-1AA0 Siemens OP012T Terminal Keyboard Touchscreen
6FC5203-0AF06-1AA0 Siemens OP012T Terminal Keyboard Touchscreen
Model
6FC5203-0AF06-1AA0

Item specifics

Brand
Siemens
Warranty
6 Months
Product Line
Siemens OP012T Operator Panel
Supply
Sinumer HMI OP012T Membrane Keyboard Plastic Case
size
12.1 inch

Review

Description

6FC5203-0AF06-1AA0 Siemens SINUMERIK HMI OP012T OPERATOR PANEL Touch Screen Panel Glass Operator Panel Keypad and Plastic Shell Housing Repair Replacement

Order each part separately is available

6FC52030AF061AA0 Siemens SINUMERIK HMI OP012T OPERATOR PANEL Membrane Switch and Touch Digitizer Glass Plastic Case Cover Repair Replacement


Description of Siemens 6FC5203-0AF06-1AA0 Membrane Keyboard HMI Touch Glass
The SINUMERIK OP 012T 6FC52030AF061AA0 operator panel front for decentralized configuration enables physical separation from the SINUMERIK PCU. The PCU can be mounted in a control cabinet. With the SINUMERIK OP 012T 6FC5 203-0AF06-1AA0 Terminal Keypad Touch Screen Monitor operator panel front, up to four distributed operator panel fronts can be connected to a PCU. The distance between PCU and operator panel fronts is determined by the maximum distance of two access points(100 m).
Signal transmission between Siemens 6FC52030AF061AA0 Membrane Switch Touchscreen operator panel front and PCU via Industrial Ethernet Mixed operation with one operator panel front directly at the PCU is possible. Operation has the same authorization rights as operation on an operator panel front connected directly to the PCU. The screen on the passive operator panel is blacked out.
The Siemens SINUMERIK OP 012 6FC5203-0AF06-1AA0 operator panel front has a 12.1"TFT color display (with a resolution of 800 x 600 pixels [SVGA]) and a 65-key membrane keypad as well as 2 x (8+2) horizontal and 2 x 8 vertical softkeys. The 2 x 8 vertical softkeys can be used as direct control keys via the PROFIBUS DP.
The OP 012T 6FC5 203-0AF06-1AA0 Operator Keyboard Touch Screen Display is connected to the PCU via Ethernet as a Thin Client in its own subnet(via DHCP server to PCU)(see manual: "Operator Components", Edition 04.04, Section:"Distributed configuration with TCU). Securing is done from the rear using special clamps that are included in the delivery kit.

DANGER
The equipment of 6FC5203-0AF06-1AA0 Touch Digitizer Glass Operator Panel Keypad may not be commissioned until it has been clearly identified that the machine in which the controller is installed, is in full conformance with the specifications in EC Directive 98/37/EC.




Specifications:

The table below describes the parameters of the 6FC5 203-0AF06-1AA0 Siemens OP012T HMI Parts.

Mounting Format: 19''
Protection: IP 65
Flat Screen: 12.1 in TFT
Product Line: Siemens OP012T
Softkeys: 2 x 8 Horizontal Rows
Combination: PCU, TCU, Videolink Receiver
Resolution: 800 x 600 Pixels
Part Number: 6FC5203-0AF06-1AA0
Height Units: 7 HU
Power Supply: Status LEDs


Related Simatic OP012T Part No. :

SINUMERIK OP012T Keypad Description Inventory status
6AU1350-2AH23-1BE1 Siemens SINUMERIK HMI OP012T Terminal Keypad Repair In Stock
6FC5203-0AF02-0AA0 Siemens OP012 Membrane Switch Replacement Available Now
6FC5203-0AF02-0AA1 Siemens SINUMERIK Operator Keyboard Repair In Stock
6FC5203-0AF02-0AA2 Siemens SINUMERIK HMI OP012 Keypad Membrane Replacement In Stock
6FC5203-0AF06-1AA0 Siemens OP012T Membrane Keypad Switch Repair Available Now
6FC5203-0AF07-0AA0 Siemens SINUMERIK Keyboard Membrane Replacement In Stock
6FC5203-0AF52-0AA0 Siemens SINUMERIK HMI OP012 Terminal Keypad Repair Available Now
6FC5210-0DF22-0AA0 Siemens OP012 Switch Membrane Repair Available Now
6FC5248-0AF02-0AA0 Siemens SINUMERIK HMI OP012 Membrane Keypad Replacement In Stock
6FC5248-0AF02-0AA2 Siemens SINUMERIK HMI OP012 Membrane Keypad Replacement In Stock
Siemens OP012T Part No. Description Inventory status


Siemens OP012T series HMI Manuals PDF Download:


FAQ:

Question: What should I pay attention to screen saver of 6FC5 203-0AF06-1AA0?

Answer: The ribbon cable for the 6FC52030AF061AA0 operator panel front is inserted through the cut-out in the casing. Here, the switching states of the vertical direct control keys can be picked up without intermediate firmware. These signals can be evaluated in the direct control key module. Direct control key interface X11 on the keyboard controller for the operator panel front: per DIN 41651, plug connector, cable length max.0.5 m.


Question: What is the view of operator panel front OP 012T 6FC5203-0AF06-1AA0?

Answer:
What is the view of operator panel front OP 012T 6FC5 203-0AF06-1AA0?
What is the view of operator panel front OP 012T 6FC5 203-0AF06-1AA0?

Common misspellings: 

FC5203-0AF06-1AA0
6FC5203-0AF06-1A0
6FC5203-0AF06-11AA0
6FC5203-0AF0-61AA0
6FC5203-0AF06-1A0A